As high quality antirust primer, for coating of weld and boring site, as conducting inter layer by spot-welding. Zinc spray can be applied to all heat-stressed parts, e.g., exhaust systems, heat exchanger, oil coolers, etc.
All parts need to be free of oil, grease, dust and dirt. Rust and cinder have to be completely removed mechanically from the underground (sandjet).The application need to be done at room temperature. Before using shake the can for 2 minutes, make a test spray and then apply the product in a distance of 20 – 30 cm using a x-cross movement. The surface is 8 minutes after dust-dry, after 20 – 30 minutes it is dry to handle. After 48 hours the treated parts are completely dried and needs 48 hours and the dry film should have a layer form 50-80 µm.
approx. 20-30 minutes
Depending on application